Synthesis of Methadone
- Thread starter WillD
- Start date
There are a lot of errors in the synthesis here.
You write that you need 2,2-Diphenyl-3-methyl-4-dimethylambutyronitrile,
this is not the correct nitrile isomer and you can obtained from it only isomethadone.
2,2-Diphenyl-3-methyl-4-dimethylamino butyronitrile does not have a crystalline form.
You write: "It was then recrystallized from petroleum ether to give 900 g of 2,2-Diphenyl-3-methyl-4-dimethylambutyronitrile."
Initially, you started correctly,
and said that you need 4-cyano-2-dimethylamino-4,4-diphenylbutane.
4-cyano-2-dimethylamino-4,4-diphenylbutane (Premethadone)
CAS: 125-79-1 is the correct nitrile. Only from it you can get methadone.
In the synthesis of a nitrile, you don't use a solvent...
Also, you don't use a Catalyst, which shifts the reaction in the right direction to increase the yield of the desired nitrile.
You are left with a lot of unreacted precursor, since the deprotonation must be done in the presence of a catalyst.
I'll disappoint you, but you can't get methadone in THF, you can get methadone only through ethyl ether.. The addition reaction does not work in THF.
In your synthesis there is no word about the purification of nitrile, therefore it is dirty and black under the conditions that you describe.
I don't know where you got this synthesis, but you won't get anything good - sorry.
You write that you need 2,2-Diphenyl-3-methyl-4-dimethylambutyronitrile,
this is not the correct nitrile isomer and you can obtained from it only isomethadone.
2,2-Diphenyl-3-methyl-4-dimethylamino butyronitrile does not have a crystalline form.
You write: "It was then recrystallized from petroleum ether to give 900 g of 2,2-Diphenyl-3-methyl-4-dimethylambutyronitrile."
Initially, you started correctly,
and said that you need 4-cyano-2-dimethylamino-4,4-diphenylbutane.
4-cyano-2-dimethylamino-4,4-diphenylbutane (Premethadone)
CAS: 125-79-1 is the correct nitrile. Only from it you can get methadone.
In the synthesis of a nitrile, you don't use a solvent...
Also, you don't use a Catalyst, which shifts the reaction in the right direction to increase the yield of the desired nitrile.
You are left with a lot of unreacted precursor, since the deprotonation must be done in the presence of a catalyst.
I'll disappoint you, but you can't get methadone in THF, you can get methadone only through ethyl ether.. The addition reaction does not work in THF.
In your synthesis there is no word about the purification of nitrile, therefore it is dirty and black under the conditions that you describe.
I don't know where you got this synthesis, but you won't get anything good - sorry.
- By adrenochrome
1. firstly, he wrote that he received the correct nitrile by recrystallized from petroleum ether (here you can use hexane) 2. Without a solvent, nitrile also comes out, since alkali acts as a catalyst and why does the reaction in tetrahydrofuran not go?) you don’t know how the Grignard reaction adds a substance
We produced methadone in different ways.
Methadone bases are not suitable for consumption!
The base has a beautiful crystal shape, but if you inject it into yourself... you can die, it crystallizes right into you.
You need to use only hydrochloride salt and well purified!
Trust me, I have been producing methadone since 2006!
Methadone bases are not suitable for consumption!
The base has a beautiful crystal shape, but if you inject it into yourself... you can die, it crystallizes right into you.
You need to use only hydrochloride salt and well purified!
Trust me, I have been producing methadone since 2006!
@Hank Schrader is absolutely right on most points.
However, it is actually possible to produce the methadone precursor without a solvent through a reaction of diphenylacetonitrile,
dimethylamino-2-chloropropane HCl and sodium hydroxide. The reaction partners involved should be ground very finely and
mixed well. After the reaction has taken place, extraction can be carried out with diethyl ethe
What seems very strange to me, however, is the ethylmagenesium bromide. I have already prepared EMB countless times (for methadone
synthesis, but also for other syntheses). EMB does not have a yellowish color and is not a clear reagent. EMB that I have made so far always
had a brown-grey color and had always a slight cloudiness.
to THF: All I can say is that I have never used THF to make EMB. Therefore I can't say whether methadone synthesis is possible with it (it is
definitely usable for Grignard). I don't use it as a Grignard solvent because it has unlimited miscibility with H2O.
You were also right about the name of the methadone precursor. The correct IUPAC name is (4S)-4-(dimethylamino)-2,2-diphenylpentanenitrile.
(3S)-4-(dimethylamino)-3-methyl-2,2-diphenylbutanenitrile is the IUPAC name for the Isomethadone precursor.
and here is Levomathadone & Dexromethadone
However, it is actually possible to produce the methadone precursor without a solvent through a reaction of diphenylacetonitrile,
dimethylamino-2-chloropropane HCl and sodium hydroxide. The reaction partners involved should be ground very finely and
mixed well. After the reaction has taken place, extraction can be carried out with diethyl ethe
What seems very strange to me, however, is the ethylmagenesium bromide. I have already prepared EMB countless times (for methadone
synthesis, but also for other syntheses). EMB does not have a yellowish color and is not a clear reagent. EMB that I have made so far always
had a brown-grey color and had always a slight cloudiness.
to THF: All I can say is that I have never used THF to make EMB. Therefore I can't say whether methadone synthesis is possible with it (it is
definitely usable for Grignard). I don't use it as a Grignard solvent because it has unlimited miscibility with H2O.
You were also right about the name of the methadone precursor. The correct IUPAC name is (4S)-4-(dimethylamino)-2,2-diphenylpentanenitrile.
(3S)-4-(dimethylamino)-3-methyl-2,2-diphenylbutanenitrile is the IUPAC name for the Isomethadone precursor.
and here is Levomathadone & Dexromethadone
Last edited:
what about path with 1,1-diphenylbutane-2-sulfonic acid as precursor?
It is not profitable for China to sell and synthesize such a substance, and you will not be able to cope - this requires significant investments.
ok, I will publish my synthesis here for revision and advice.
step 4 changed: diphenylacetonitrile (50 g), 1-dimethylamino-2-chloropropane hydrochloride (50 g)(think can use any 1-dimethylamino-2-halopropane), 50% sodium hydroxide solution (80 g), water (40 ml), toluene (125 ml) and tetrabutylammonium bromide (5g) boiled under reflux for 2 hours. Then I separated the aminonitriles. The yield was 30 grams, the melting point was 90.
step 4 changed: diphenylacetonitrile (50 g), 1-dimethylamino-2-chloropropane hydrochloride (50 g)(think can use any 1-dimethylamino-2-halopropane), 50% sodium hydroxide solution (80 g), water (40 ml), toluene (125 ml) and tetrabutylammonium bromide (5g) boiled under reflux for 2 hours. Then I separated the aminonitriles. The yield was 30 grams, the melting point was 90.