I'm struggling so much trying to install Anbox on the whonix template on qubes! i've tried a couple of differents ways but nothing, i managed to install it but then when i try to open it crash. Now i have uninstalled it, can someone please help me with the correct method?
I did fast translation with deepl. This guide is not written by me. But it works. Great thanks to Diabolo (probably an author). If something is not understable, please report me and I'll try to fix it. I hope that I'd help you.
Guide tested with Bliss version 15.8.6 and Qubes version 4.1.2
Perhaps it will become obsolete in the future
1 We install the Qubes system
2 We turn on the sys-whonix machine (the sys-whonix machine must be turned on, this is very important, without it there will be no internet)
3 We increase the disk space allocated for one of our torified virtual machines
4 We download the Bliss system image to this torified machine (preferably by typing the commands sudo apt update in the Terminal, then sudo apt install wget -y, then wget -c -q --show-progress HERELINK)
5) We open Qube Manager
6) We click Qube
7) We click New qube
8) In the Name and label field, we type android
9. we choose the color we like
10) In the Type field, we choose StandaloneVM (fully persistent).
11) In the Template field, we choose (none).
12) In the Networking field, we choose sys-whonix
13) Click OK
14) Click from file in qube
15) We select the machine where we keep the Bliss-v15.8.6.iso file
16. we click the icon of three dots ....
17. we select the file Bliss-v15.8.6.iso
18. click OK
19. click OK
20. we choose Installation - Install BlissOS-15.8.6 to harddisk
21. choose Create/Modify partitions
22) Click Enter
23) Choose xvda Harddisk 10.00GB
24) Click Enter
25) When asked Do you want to use GPT? answer No
26) Choose New
27) Choose Primary
28) Click Enter to accept the proposed Size (in MB)
29) Click Enter to set the Bootable flag
30) We select Write
31) Click Enter
32) We type yes
33) Click Enter
34) Choose Quit
35) Click Enter
Select xvda1 unknown
Select ext4
Click Enter
The question Are you sure to format the parition xvda1? is answered with Yes
40) The question Do you want to install boot loader GRUB? is answered with Yes
41) Click Reboot
42. click Enter
43) Hover over the name of the new machine in Qube Manager
44) Click the right mouse button
45) Click Settings
46) Click Advanced
47) Uncheck Include in memory balancing (this option should be disabled)
48) Initial memory: enter 4096 MB
49) Click OK
50) Hover over the name of the new machine in Qube Manager
51) Click the right mouse button
52) Click Start/Resume
53. when we see GRUB, we stay with the default option, the first one from the top, but don't click Enter yet (this is very important, without it it won't boot and there will be no Internet)
54. click e (this is very important, without this it won't boot and there will be no Internet)
55 We click e (it's very important, without it it won't start and there will be no internet)
56) We type nomodeset VIRT_WIFI=1 (this is very important, without this it will not start and there will be no internet)
57) We click enter
58. click b
59) Change language to Polish
60) Click START
61) Click CONFIGURE IN OFFLINE MODE
62) Click NEXT
63) Click NEXT
64) Deselect all consents given to Google
65) Click ACCEPT
66) Click NO NOW
67) Click REMOVE MIMOUSLY
68) Click Taskbar for Bliss OS
69) Click Always
70) Click Grant Permission
71) Click Taskbar
72) Click Allow display over other applications
73) Click Network and Internet
74) Click Internet
75) Click VirtWifi
76) Right-click VirtWifi
77. click Change
78) Click Advanced Options
79) Click DH*****
80) Change to Static
81. we need to take the IP addresses from Qube Manager (if Qube Manager does not show the IP address for the android machine, it means that it has not yet been closed and reopened, just close and reopen the Qube Manager window). The IP addresses will almost certainly be different in you than below. However, I give for the sake of example. The rule is as follows. IP address = IP address of the android machine. Gateway, DNS 1 and DNS 2 = IP address of sys-whonix machine.
IP address 10.137.0.9
Gateway 10.137.0.8
Network prefix length 32
DNS 1 10.137.0.8
DNS 2 10.137.0.8
82. click Save
83 We should get a message that we have successfully connected to the Internet
84. we open the default Fulguris browser (click the blue lightning bolt icon with a black background)
85 We click No
86 We click DuckDuckGo
87) Type F-Droid
88) We open the F-Droid website https://f-droid.org/
89) Click Download F-DROID APPLICATION
90) Click Enable
91) Click Download
92. click the lightning bolt icon in the upper right corner
93) Click Downloaded
94) Click Allow
95) Click Allow
96) Click Allow to manage all files
97) Click the undo icon to exit the settings
98) Click Download
99) Click F-Droid.apk
100. click INSTALL
101. click Package Installer
102) Click Always
103) Click Settings
104) Click Allow from this source
Click Install
106) Click Open
107. we wait until the repositories update is successful
108. click the search icon
109) Click Mull
110) Click INSTALL
111) Wait for the download to complete
112) Click Settings
113) Click Allow from this source
114) Click Install
115. when the installation is complete, we make a swipe gesture from the bottom corner to the top to see the open applications, then click Clear All
116. on the Bliss home screen, we click the button in the lower left corner
117 We click the Mull icon
118. we click in the corner of the Mull window and drag to enlarge the window (we don't click the maximize button, as it can rotate the screen 90 degrees)
119 We click Set as default browser
120) Click Mull
121) Click Set as default
122 The Mull browser is installed and set as default. We can browse the Internet
123. we can go to https://check.torproject.org/ to check if we are safe. Congratulations should be displayed. This browser is configured to use Tor.
If we want to return to the home screen, we need to make a swipe gesture from the bottom corner to the top, then click Clear All.
We can sign in to Google Play and download apps from this store if we have an anonymous Google account (note, do not sign in to non-anonymous accounts, used even once from your real IP address).
You will need to repeat these steps every time you boot the system:
1. click Start/Resume
2) When you see GRUB, stay with the default option, the first one from the top, but don't click Enter yet (this is very important, without it it won't boot and there will be no internet)
3) We click e (this is very important, without this it will not boot and there will be no Internet)
4. click e (this is very important, without this it will not start and there will be no internet)
5. type nomodeset VIRT_WIFI=1 (this is very important, without this it will not start up and there will be no internet)
6) We click enter
7. click b
